10km Firefighting Unmanned Aircraft Drone System with Hand-Control Remote Controller for Forest Fire Protection Surveillance

• Customization: Available
• Height: ≥ 5000m
• Operating Radius: Remote
• Model NO.: HZH SF50
• Size: Small
• Usage: Firefighting
• Structure: Multi-Rotor Drone
• Unfolded Size: 1900mm*1900mm*730mm
• Folded Size: 800mm*800mm*730mm
• Wheelbase: 1800mm
• Maximum Load Weight: 60kg
• Endurance: ≥ 75 Minutes Unladen
• Protection Level: IP56
• Cruising Speed: 0-20m/S
• Battery Capacity: 52000mAh*2
• Transport Package: Cardboard Box
• Trademark: HongFei
• Origin: China

Product Description

Product Description

Material	Carbon fiber + Aviation aluminum
Wheelbase	1800mm
Size	1900mm*1900mm*730mm
Folded size	800mm*800mm*730mm
Weight of empty machine	23.2KG
Maximum load weight	60KG
Endurance	≥ 75 minutes unladen
Wind resistance level	9
Protection level	IP56
Cruising speed	0-20m/s
Operating voltage	61.6V
Battery capacity	52000mAh*2
Flight altitude	≥ 5000m
Operating temperature	-30°to70°

HZH SF50 is a 4-wing, 8-axis firefighting drone with a maximum load of 60kg and an endurance of 75 minutes. It can carry different fire fighting equipment for rescue. It is suitable for forest firefighting.
The drone uses H12 remote control, 5.5 IPS display, maximum transmission distance of 10km, and can work for 6-20 hours on a full charge.
Application scenarios: emergency rescue, air transport, fire fighting, supplies supply and other fields.
Features:
1. Carry 25L water-based or dry powder fixed high intelligent fire extinguishing ammunition, can set their own blasting height, 0-200 meters can be set to form a barrier layer of air self-detonation better fire extinguishing effect. 
2. Extinguishing range up to 80m³, full coverage.
3. First view FPV crosshair aiming system, more accurate and reliable bombing.
4. Fire extinguishing while looking down at the ground at high altitude to observe the development of the fire, a comprehensive grasp of fire information to assist the commander of the scene firefighters dispatch.


 

Product Design

·Four-axis design, foldable fuselage, can carry 60 kg of weight, single 5 seconds to unfold or stow, 10 seconds to take off, flexible maneuverability facilitates timely fighting of fires.
·Pods can be replaced quickly and can be loaded with multiple mission pods at the same time.
·Equipped with high-precision obstacle avoidance system (millimeter wave radar), in the complex urban environment, can monitor obstacles and avoid in real time (can identify the diameter of ≥ 2.5cm).
·Dual antenna dual-mode RTK accurate positioning up to centimeter level, with anti-countermeasures weapons interference capability.
·Industrial-grade flight control, multiple protection, stable and reliable flight.
·Remote real-time synchronization of data, images, site conditions, command center unified scheduling, management of UAV execution tasks.

 

Fire Extinguishing Device

Fire extinguishing components for broken windows	Projectile airburst components	Dry powder spraying component

Carry 6 broken windows dry powder fire extinguishing ammunition	Carry 4 water-based fire extinguishing bombs, air self-destruct	Carry 1 25L water-based fire extinguisher, air self-destruct

 

Product Application

·Forest firefighting is a major problem in firefighting, the general fire is found late, the rapid development of fire, firefighters safety hazards to the fire scene to take a long time, HZH SF50 firefighting drones can be found in the first time to rush to the scene of the fire, to do early detection and early elimination, to avoid the development of fire.
·HZH SF50 firefighting drone realize the unmanned, intelligent and efficient firefighting. Maximum protection of the lives and property of firefighters and the people!

 

Intelligent Control

	·1080P digital HD image transmission: H12 series remote control with MIPI camera to achieve stable transmission of 1080P real-time digital HD video. ·Ultra-long transmission distance: H12 map-digital integrated link transmission up to 10km. ·Waterproof and dustproof design: Products in the body, control switches, the peripheral interfaces are made waterproof, dust-proof protection measures. ·Industrial-grade equipment protection: Weather silicone, frosted rubber, stainless steel, aviation aluminum alloy materials are used to develop, to ensure the safety of equipment. ·HD highlight display: 5.5-inch IPS display. 2000nits high brightness display, 1920*1200 resolution, large screen-to-body ratio. ·High performance lithium battery: Using high energy density lithium-ion battery, 18W fast charging, full charge can work for 6-20 hours.
H12 Series Digital Fax Remote Control
H12 series digital map remote control adopts new surging processor, equipped with Android embedded system, using advanced SDR technology and super protocol stack to make image transmission clearer, lower latency, longer distance and stronger anti-interference.  The H12 series remote control is equipped with dual-axis camera, supporting 1080P digital high-definition picture transmission; thanks to the product's dual antenna design, the signals complement each other, and with the advanced frequency hopping algorithm, the communication capability of weak signals is greatly increased.
H12 Remote Control Parameters
Operating voltage	4.2V
Frequency band	2.400-2.483GHZ
Size	272mm*183mm*94mm
Weight	0.53KG
Endurance	6-20 hours
Number of channels	12
RF power	20DB@CE/23DB@FCC
Frequency hopping	New FHSS FM
Battery	10000mAh
Communication distance	10km
Charging interface	TYPE-C
R16 receiver parameters
Operating voltage	7.2-72V
Size	76mm*59mm*11mm
Weight	0.09KG
Number of channels	16
RF power	20DB@CE/23DB@FCC

 

Various Optional Pods

Three-axis pods + crosshair aiming, dynamic monitoring, fine and smooth picture quality.
Operating voltage		12-25V
Maximum power		6W
Size		96mm*79mm*120mm
Pixel		12 million pixels
Lens focal length		14x zoom
Minimum focusing distance		10mm
Rotatable range		tilt 100 degrees
Optional Configuration:
For specific industries and scenarios such as electric power, firefighting, etc., carrying specific equipment to achieve the corresponding functions.

 

Intelligent Charging

Intelligent fast charging system + Solid state high energy
Charging power	2500W
Charging current	25A
Charging mode	Precise charging, fast charging, battery maintenance
Protection function	Leakage protection, high temperature protection
Battery capacity	28000mAh
Battery voltage	61.6V (4.4V/monolithic)

 

Ground Station App

The ground station is heavily optimized based on QGC, with a better interactive interface and a larger map view available for control, dramatically improving the efficiency of UAVs performing tasks in specialized fields.

 

Packaging & Shipping

Production, assembly	Testing	Packaging (customized boxing method available)	Loading and shipping

Company Profile

Hongfei Aviation Technology Co., Ltd.

Is Established in 2003, with a factory in Anhui, China and a stable team of highly skilled employees, we are a professional UAV operation solution provider.
Our products have passed ISO certification and CE certification, and we have several patent certificates. We are committed to providing professional solutions for our partners in the drone industry and creating a complete supply chain of drone products.

Strength	Service	Quality	Certificates
Years of operation, with rich manufacturing and sales experience. ·Support OEM/ODM ·Independent factory ·With professional R&D team ·Possess many patents ·One of the leading drone manufacturers in China	Quality service to meet your needs. ·Perfect pre-sales and after-sales service ·According to the application industry, we can match the best solution for you ·Focus on customer feedback, timely and effective solution to customer problems	Professional production system to ensure the quality of each product. ·Passed ISO9001 international quality system certification ·Controlling the details, to ensure that each detail of the product delivery	Received several certifications. ·20 invention patents ·15 utility model patents ·23 software copyrights ·1 appearance patent

FAQ

1.What is the best price for your product?
We will quote based on the quantity of your order, the higher the quantity the higher the discount.

2.What is the minimum order quantity?
Our minimum order quantity is 1 unit, but of course there is no limit to the number of units we can purchase.

3.How long is the delivery time of the products?
According to the production order dispatch situation, generally 7-20 days.

4.What is your payment method?
Wire transfer, 50% deposit before production, 50% balance before delivery.

5.What is your warranty time? What is the warranty?
General UAV frame and software warranty of 1 year, the warranty of wearing parts for 3 months.